Oak Flooring Installation

Introduction to Oak Flooring Installation

When it comes to oak flooring installation, it does not have to be a chore. Once you have chosen between oak flooring types and oak flooring grades, you have to decide on whether or not you want to install it yourself, or have a professional come to your home and lay it down. Following this guide will give you the tools and instructions you need to do either of those things. This generally applies not only to oak floors, but to solid wood flooring in general.

Oak Flooring Installation DIY Guide

Oak Flooring Installation

Oak Flooring Installation

Step 1. Before you begin any of the oak flooring installation, you should allow your wood to rest in the room for a couple of days beforehand. If you plan to start at a certain time, leave it in there so that it can become adjusted to the particular moisture and temperature in the area. This allows the wood to expand and set up, in a sense. This is not a completely necessary step, but it will likely make the project turn out for the better if you do it.

Step 2. Put down some primer for your oak wood. This will prevent the oak wood from becoming warped, and also discourages excess moisture buildup. During this time, you should proportion out the areas where you intend to lay down the foundation for the floor. For your project to go smoothly, you must determine exactly where each pieces should go for evenness and adequate stability. If not, just go with your instincts and fix things along the way.

Step 3. Measure everything in your oak flooring installation for their dimensions to determine the sizes you need to cut, then use a chalk line to map them out. For cutting your pieces, use a power miter, also known as a chop saw. Make sure that the ends of the board cuts are shaped like a square, and go at a 90° angle. The best tool to secure your flooring is a pneumatic power nailer, since this is generally more precise and attractive.

For some areas, you will have to nail at an angle to make things secure and tight. Your initial three rows should be straight, with different lengths around six inches per piece, because these are the ones you will base the rest from as you continue cutting, measuring, and nailing down the rest. Continue installing with varying lengths, all the while snapping them into place with your nail gun. Remember to leave small gaps in each piece about a ½ inch wide.

Continue laying the rows, moving from one to another until you are finished. Check your previous work to ensure that there are no instabilities or improperly nailed-down pieces. You should make sure to scrutinize each piece during this time, because it is a difficult thing to fix as you progress through the other rows.

Tips for Finding an Oak Flooring Installer

Check the local Internet pages or advertisements in newspapers or phone books for carpenters, because they are capable of installing hardwood floors. Prices can be competitive depending on how many options you have available to you. Another option are specialists who deal in floors, particleboard and vinyls. You will have to pay for materials and labor, but labor is based on individual rates. If you desire to have someone else do the work, make sure that they have at least a few years experience in oak flooring installation and related projects.

Leave a Reply

Your email address will not be published. Required fields are marked *